PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS27169-16
MS27169-16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING AND RUBBER SYNTHETIC OVERALL, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hole_diameter: 0.205 INCHES NOMINAL FIFTEENTH HOLE IN, overall_width: 1.750 INCHES NOMINAL IN, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 1.204 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-775-9523, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27169-16
NSN: 5330-00-775-9523
FSC: 5330
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING AND RUBBER SYNTHETIC OVERALL
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hole_diameter0.205 INCHES NOMINAL FIFTEENTH HOLE IN
overall_width1.750 INCHES NOMINAL IN
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter1.204 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.904 INCHES NOMINAL IN
gage_ring_thickness0.094 INCHES NOMINAL IN
cross-sectional_thickness0.146 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
material_document_and_classificationN406-60,FSCM 83259 MFR REF 2ND MATERIAL RESPONSE OVERALL
NSN5330-00-775-9523
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS27169-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
CROSS-SECTIONAL THICKNESS: 0.146 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.205 INCHES NOMINAL FIFTEENTH HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: N406-60,FSCM 83259 MFR REF 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.204 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
CROSS-SECTIONAL THICKNESS0.146 INCHES NOMINAL IN
HOLE DIAMETER0.205 INCHES NOMINAL FIFTEENTH HOLE IN
OVERALL WIDTH1.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONN406-60,FSCM 83259 MFR REF 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.204 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER0.904 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MS27196-32Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS27196Interchangeable
interchangeable cross-reference
interchangeable
NM100011 LI 141Interchangeable
interchangeable cross-reference
interchangeable
XG0299100101Interchangeable
interchangeable cross-reference
interchangeable
AS27196A-20Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-248Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS27169-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27169-16?
MS27169-16 is a GASKET.
What parts can replace MS27169-16?
There are 23 known substitutes for MS27169-16: MS27196-32, SAE-AS27196, NM100011 LI 141 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27169-16?
MS27169-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-775-9523. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27169-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026