PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/1-248

M83248/1-248 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include width: 35.000 INCHES MINIMUM AND 37.000 INCHES MAXIMUM IN, material: RUBBER FLUOROCARBON CLASS FPM LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, environmental_protection: COMPRESSION AND HIGH TEMPERATURE AND FLUID RESISTANT, minimum_tensile_strength: ERR-060, nondefinitive_spec/std_data: 2 TYPE AND 1 CLASS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1965, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-248
NSN: 5331-00-165-1965
FSC: 5331 — O-RING
CAGE: 70106 — ACUSHNET RUBBER COMPANY, INC. DBA PRECIX (USA)
SPECIFICATIONS
width35.000 INCHES MINIMUM AND 37.000 INCHES MAXIMUM IN
materialRUBBER FLUOROCARBON CLASS FPM LOCATION NOT OTHERWISE SPECIFIED
thickness0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
environmental_protectionCOMPRESSION AND HIGH TEMPERATURE AND FLUID RESISTANT
minimum_tensile_strengthERR-060
nondefinitive_spec/std_data2 TYPE AND 1 CLASS
nonmetallic_hardness_rating70.0 MINIMUM SHORE DUROMETER A AND 80.0 MAXIMUM SHORE DUROMETER A
material_document_and_classificationMIL-R-83248 TYPE 2 CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5331-00-165-1965
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-248 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.974 INCHES MINIMUM AND 5.050 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 4.704 INCHES MINIMUM AND 4.764 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER4.974 INCHES MINIMUM AND 5.050 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER4.704 INCHES MINIMUM AND 4.764 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
AMS3216TY2CL1Interchangeable
interchangeable cross-reference
interchangeable
AMS3216Interchangeable
interchangeable cross-reference
interchangeable
24503Interchangeable
interchangeable cross-reference
interchangeable
1263790Interchangeable
interchangeable cross-reference
interchangeable
MS51068-51Interchangeable
interchangeable cross-reference
interchangeable
388070Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/1-248?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-248?
M83248/1-248 is a O-RING.
What parts can replace M83248/1-248?
There are 32 known substitutes for M83248/1-248: AMS3216TY2CL1, AMS3216, 24503 and 29 more. Substitute compatibility should be verified for your specific system.
Is M83248/1-248 still available?
M83248/1-248 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-248

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026