PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS27196-32
MS27196-32 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 AND RUBBER FLUOROCARBON CLASS FPM OVERALL, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hole_diameter: 0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.984 INCHES NOMINAL IN, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-052-6703, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27196-32
NSN: 5330-00-052-6703
FSC: 5330
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 AND RUBBER FLUOROCARBON CLASS FPM OVERALL
temp_rating-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hole_diameter0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.984 INCHES NOMINAL IN
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.841 INCHES NOMINAL IN
bolt_hole_quantity4
gage_ring_thickness0.092 INCHES NOMINAL IN
bolt_circle_diameter3.359 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.312 INCHES NOMINAL IN
NSN5330-00-052-6703
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS27196-32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
SIDE RADIUS FROM GASKET CENTER: 1.679 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.312 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 3.359 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.132 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
HOLE DIAMETER: 0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
SIDE RADIUS FROM GASKET CENTER1.679 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.312 INCHES NOMINAL IN
OVERALL WIDTH3.984 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.359 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.132 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
HOLE DIAMETER0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
ELONGATION PERCENTAGE125 MAXIMUM
GAGE RING THICKNESS0.092 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
NM100011 LI 141Interchangeable
interchangeable cross-reference
interchangeable
XG0299100101Interchangeable
interchangeable cross-reference
interchangeable
AS27196A-20Interchangeable
interchangeable cross-reference
interchangeable
MS27169-16Interchangeable
interchangeable cross-reference
interchangeable
460-030-16Interchangeable
interchangeable cross-reference
interchangeable
AS27196-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS27196-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27196-32?
MS27196-32 is a GASKET.
What parts can replace MS27196-32?
There are 14 known substitutes for MS27196-32: NM100011 LI 141, XG0299100101, AS27196A-20 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27196-32?
MS27196-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-052-6703. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27196-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026