PartsTable
Technical Data Sheet
PartsTable / COMPONENT / XG0299100101
XG0299100101 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM AND STEEL COMP 302 OVERALL, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hole_diameter: 0.261 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.874 INCHES NOMINAL IN, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-182-3696, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XG0299100101
NSN: 5330-00-182-3696
FSC: 5330
CAGE: D8266 — ROLLS-ROYCE SOLUTIONS GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM AND STEEL COMP 302 OVERALL
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hole_diameter0.261 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.874 INCHES NOMINAL IN
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.138 INCHES NOMINAL IN
bolt_hole_quantity4
gage_ring_thickness0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
bolt_circle_diameter2.342 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.266 INCHES NOMINAL IN
NSN5330-00-182-3696
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: XG0299100101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.266 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.132 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
GAGE RING THICKNESS: 0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.138 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.261 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS0.266 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.132 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
GAGE RING THICKNESS0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
APERTURE DIAMETER1.138 INCHES NOMINAL IN
HOLE DIAMETER0.261 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059, COMP 302 ANNEALED MIL SPEC 1ST MATERIAL RESPONSE AND MIL-R-83248, TYPE II, CLASS 1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL WIDTH2.874 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
MS27196-32Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS27196Interchangeable
interchangeable cross-reference
interchangeable
MS27169-16Interchangeable
interchangeable cross-reference
interchangeable
460-030-16Interchangeable
interchangeable cross-reference
interchangeable
AS27196-16Interchangeable
interchangeable cross-reference
interchangeable
MS27196-48Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy XG0299100101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XG0299100101?
XG0299100101 is a GASKET.
What parts can replace XG0299100101?
There are 16 known substitutes for XG0299100101: MS27196-32, SAE-AS27196, MS27169-16 and 13 more. Substitute compatibility should be verified for your specific system.
Is XG0299100101 still available?
XG0299100101 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XG0299100101

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026