PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24066-4-117
M24066-4-117 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN, length: 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_height: 1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CHROMATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-096-4299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24066-4-117
NSN: 5340-01-096-4299
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN
length1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_height1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop/holding_dimension0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.615 INCHES MINIMUM IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-096-4299
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M24066-4-117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
DISTANCE FROM LOOP CENTER TO END: 0.615 INCHES MINIMUM IN
•
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
DISTANCE FROM LOOP CENTER TO END0.615 INCHES MINIMUM IN
MATERIAL THICKNESS0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
OVERALL HEIGHT1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
LENGTH1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
457-5672Upgraded Successor
successor cross-reference
successor
MS28137-117Upgraded Successor
successor cross-reference
successor
MIL-C-24066/4DUpgraded Successor
successor cross-reference
successor
M24066/4-117Interchangeable
Same NIIN cross-reference
interchangeable
NASM24066/4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24066-4-117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066-4-117?
M24066-4-117 is a CLIP,SPRING TENSION.
What parts can replace M24066-4-117?
There are 5 known substitutes for M24066-4-117: 457-5672, MS28137-117, MIL-C-24066/4D and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24066-4-117?
M24066-4-117 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-096-4299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24066-4-117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026