Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN, length: 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_height: 1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CHROMATE OVERALL. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5340-00-042-3968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-C-24066/4D
NSN:5340-00-042-3968 FSC:5340 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
width
1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN
length
1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
material
STEEL OVERALL
overall_height
1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop/holding_dimension
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.615 INCHES MINIMUM IN
material_document_and_classification
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-00-042-3968
COMPONENT DIAGRAM
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 1.000 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
•
LENGTH: 1.060 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,T-1/4H FED SPEC ALL MATERIAL RESPONSES OVERALL
•
WIDTH: 1.875 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.144 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.670 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS
LOOP/HOLDING DIMENSION
1.000 INCHES NOMINAL IN
MATERIAL
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
LENGTH
1.060 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533,T-1/4H FED SPEC ALL MATERIAL RESPONSES OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-C-24066/4D?
MIL-C-24066/4D is a CLIP,SPRING TENSION.
What parts can replace MIL-C-24066/4D?
There are 8 known substitutes for MIL-C-24066/4D: M24066/4-117, NASM24066/4, 10424396 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-C-24066/4D?
MIL-C-24066/4D is cataloged in the Federal Logistics Information System under NSN 5340-00-042-3968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.