PartsTable
Technical Data Sheet

NASM24066/4 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NASM24066/4: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.3800 INCHES MINIMUM AND 0.4200 INCHES MAXIMUM IN, length: 1.1770 INCHES MINIMUM AND 1.1970 INCHES MAXIMUM IN, hole_diameter: 0.1000 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM IN, overall_height: 0.4300 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), special_features: OPTIONAL 2 SLOTS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-031-0489, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NASM24066/4
NSN: 5340-00-031-0489
NIINs: 000310489, 000423970, 001519718, 002455321, 004251380, 004333597, 005914947, 009195180, 010102693, 010398875, 010652806, 010718477, 010721361, 010724995, 010964299, 011186447, 011324662, 011426396, 011454294, 011679319, 011879777, 012156925, 012247388, 012341490, 012854753, 014629885
FSC: 5340 — Hardware, Commercial
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
width0.3800 INCHES MINIMUM AND 0.4200 INCHES MAXIMUM IN
length1.1770 INCHES MINIMUM AND 1.1970 INCHES MAXIMUM IN
materialSTEEL COMP 1045 OR STEEL COMP 1050 OR STEEL COMP 1055 OR STEEL COMP 1065 OR STEEL COMP 1075 OR STEEL COMP 1085 OR STEEL COMP 1095 OVERALL
hole_diameter0.1000 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM IN
hole_quantity3
overall_height0.4300 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
special_featuresOPTIONAL 2 SLOTS
style_designatorSTANDOFF
surface_treatmentCADMIUM OVERALL
material_thickness0.0090 INCHES MINIMUM AND 0.0150 INCHES MAXIMUM IN
loop/holding_dimension0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM IN
NSN5340-00-031-0489
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NASM24066/4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.225 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.152 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
LENGTH0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.225 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.152 INCHES MINIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
MILC24066Reference document
Same NSN cross-reference
Reference document — Secondary reference
M24066/4-102Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NASM24066/4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM24066/4?
NASM24066/4 is a CLIP,SPRING TENSION.
What parts can replace NASM24066/4?
There are 2 known substitutes for NASM24066/4: MILC24066, M24066/4-102. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM24066/4?
NASM24066/4 is cataloged in the U.S. Government catalog under NSN 5340-00-031-0489. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NASM24066/4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.