PartsTable
Technical Data Sheet
Download PDF

MS28137-117 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS28137-117: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.875 INCHES NOMINAL IN, length: 1.060 INCHES NOMINAL IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.144 INCHES NOMINAL IN, overall_height: 1.220 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-042-3968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28137-117
NSN: 5340-00-042-3968
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
width1.875 INCHES NOMINAL IN
length1.060 INCHES NOMINAL IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter0.144 INCHES NOMINAL IN
overall_height1.220 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.032 INCHES NOMINAL IN
loop/holding_dimension1.000 INCHES NOMINAL IN
distance_from_loop_center_to_end0.670 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,T-1/4H FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-00-042-3968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28137-117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.060 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,T-1/4H FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 1.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.670 INCHES NOMINAL IN
•
WIDTH: 1.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.220 INCHES NOMINAL IN
LENGTH1.060 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,T-1/4H FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.670 INCHES NOMINAL IN
WIDTH1.875 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
HOLE DIAMETER0.144 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
457-5672Reference document
Same NSN cross-reference
Reference document — Informative reference only
MIL-C-24066/4DReference document
Same NSN cross-reference
Reference document — Identification reference
6085-1CReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS28137-117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28137-117?
MS28137-117 is a CLIP,SPRING TENSION.
What parts can replace MS28137-117?
There are 3 known substitutes for MS28137-117: 457-5672, MIL-C-24066/4D, 6085-1C. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28137-117?
MS28137-117 is cataloged in the U.S. Government catalog under NSN 5340-00-042-3968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28137-117