PartsTable
Technical Data Sheet
PartsTable / O-RING / AS586-027
AS586-027 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 50.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 1.290 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN, cross-sectional_height: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-171-9315, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS586-027
NSN: 5331-00-171-9315
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hardness_rating50.0 SHORE DUROMETER A NOMINAL
center_hole_diameter1.290 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
cross-sectional_height0.062 INCHES NOMINAL IN
NSN5331-00-171-9315
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS586-027 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.290 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.290 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL
TEMP RATING-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
C10096-0060-0013Interchangeable
interchangeable cross-reference
interchangeable
AS568-013Interchangeable
interchangeable cross-reference
interchangeable
AMS3303-013ESInterchangeable
interchangeable cross-reference
interchangeable
AMS3303Interchangeable
interchangeable cross-reference
interchangeable
AS568-908Interchangeable
interchangeable cross-reference
interchangeable
MS9393-06Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS586-027?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS586-027?
AS586-027 is a O-RING.
What parts can replace AS586-027?
There are 24 known substitutes for AS586-027: C10096-0060-0013, AS568-013, AMS3303-013ES and 21 more. Substitute compatibility should be verified for your specific system.
Is AS586-027 still available?
AS586-027 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS586-027

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026