PartsTable
Technical Data Sheet
PartsTable / MRO / AS568-013
AS568-013 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The AS568-013 is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE, buffer_size: 256.0 MEGABYTES, unit_design: DESK TOP, printer_type: LASER, overall_width: 16.340 INCHES NOMINAL IN, interface_type: IEEE 1284. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-047-3862, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ AS568-013
NSN: 5331-00-047-3862
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE
buffer_size256.0 MEGABYTES
unit_designDESK TOP
printer_typeLASER
overall_width16.340 INCHES NOMINAL IN
interface_typeIEEE 1284
overall_height13.270 INCHES NOMINAL IN
overall_length19.300 INCHES NOMINAL IN
special_features2 PAPER TRAYS NOMINAL, 4 MAXIMUM
center_hole_diameter0.364 INCHES NOMINAL IN
print_speed_and_color25.00 BLACK AND WHITE PAGES PER MINUTE
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-00-047-3862
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-013 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SILICONE CLASS Q
•
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SILICONE CLASS Q
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TEMP RATING-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
AMS3303Interchangeable
interchangeable cross-reference
interchangeable
AS568-908Interchangeable
interchangeable cross-reference
interchangeable
MS9393-06Interchangeable
interchangeable cross-reference
interchangeable
ZZ-R-765Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-011Interchangeable
interchangeable cross-reference
interchangeable
10017039Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-013?
AS568-013 is a AS568-013. It is classified as a MRO (MRO_GENERAL).
What parts can replace AS568-013?
There are 27 known substitutes for AS568-013: AMS3303, AS568-908, MS9393-06 and 24 more. Substitute compatibility should be verified for your specific system.
Is AS568-013 still available?
AS568-013 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-013

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026