PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-908
AS568-908 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE, center_hole_diameter: 0.644 INCHES NOMINAL IN, cross-sectional_height: 0.087 INCHES NOMINAL IN, end_item_identification: SWITCHBOARD; TICONDEROGA CLASS CG (47), material_document_and_classification: SAE-AMS 3660C ASSN STD ALL MATERIAL RESPONSES, part_name_assigned_by_controlling_agency: O-RING, ADJUSTING PIN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-020-0105, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-908
NSN: 5331-00-020-0105
FSC: 5331 — O-RING
CAGE: 1JYT1 — BLADE INDUSTRIAL PRODUCTS INC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE
center_hole_diameter0.644 INCHES NOMINAL IN
cross-sectional_height0.087 INCHES NOMINAL IN
end_item_identificationSWITCHBOARD; TICONDEROGA CLASS CG (47)
material_document_and_classificationSAE-AMS 3660C ASSN STD ALL MATERIAL RESPONSES
part_name_assigned_by_controlling_agencyO-RING, ADJUSTING PIN
NSN5331-00-020-0105
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-908 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.818 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.635 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.818 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.635 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
2266975Interchangeable
interchangeable cross-reference
interchangeable
C20575Interchangeable
interchangeable cross-reference
interchangeable
AMS3303Interchangeable
interchangeable cross-reference
interchangeable
AS568-908Interchangeable
interchangeable cross-reference
interchangeable
678-0023-00Interchangeable
interchangeable cross-reference
interchangeable
30118Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-908?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-908?
AS568-908 is a O-RING.
What parts can replace AS568-908?
There are 30 known substitutes for AS568-908: 2266975, C20575, AMS3303 and 27 more. Substitute compatibility should be verified for your specific system.
Is AS568-908 still available?
AS568-908 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-908

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026