PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS9393-06
MS9393-06 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CUSHION,ARCHED is a the manufacturer industrial component. Key specifications include radius: 0.219 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q, groove_width: 0.516 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN, flange_height: 0.031 INCHES NOMINAL IN, overall_width: 0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN, flange_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-107-6217, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9393-06
NSN: 5340-00-107-6217
FSC: 5340
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
radius0.219 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
materialRUBBER SILICONE CLASS Q
groove_width0.516 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN
flange_height0.031 INCHES NOMINAL IN
overall_width0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
flange_thickness0.062 INCHES NOMINAL IN
outside_corner_radius0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
distance_between_arch_center_lines0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
NSN5340-00-107-6217
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9393-06 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 0.219 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
FLANGE THICKNESS: 0.062 INCHES NOMINAL IN
•
FLANGE HEIGHT: 0.031 INCHES NOMINAL IN
•
GROOVE WIDTH: 0.516 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ARCH CENTER LINES: 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
RADIUS0.219 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
FLANGE THICKNESS0.062 INCHES NOMINAL IN
FLANGE HEIGHT0.031 INCHES NOMINAL IN
GROOVE WIDTH0.516 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN
OVERALL WIDTH0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
DISTANCE BETWEEN ARCH CENTER LINES0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
C10096-0060-0013Interchangeable
interchangeable cross-reference
interchangeable
AS568-013Interchangeable
interchangeable cross-reference
interchangeable
AMS3303-013ESInterchangeable
interchangeable cross-reference
interchangeable
AMS3303Interchangeable
interchangeable cross-reference
interchangeable
AS568-908Interchangeable
interchangeable cross-reference
interchangeable
ZZ-R-765Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9393-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9393-06?
MS9393-06 is a CUSHION,ARCHED.
What parts can replace MS9393-06?
There are 21 known substitutes for MS9393-06: C10096-0060-0013, AS568-013, AMS3303-013ES and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9393-06?
MS9393-06 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-107-6217. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9393-06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026