The Circuit Breaker, cataloged under National Stock Number 5925-01-292-3301, is classified within Federal Supply Class 5925 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Federal Specifications Promulgated by General Services Administration Washington DC. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 11 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5925-01-292-3301 |
| Primary Part Number | W-C-375/18 |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — No Item Name Available |
| Manufacturer | Federal Specifications Promulgated by General Services Administration Washington DC |
| Status | ACTIVE |
| Body Width | 2.750 INCHES NOMINAL IN |
| Unthreaded Mounting Hole Diameter | 0.188 INCHES NOMINAL IN |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.000 INCHES NOMINAL IN |
| Boss Height | 0.125 INCHES NOMINAL IN |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Length | 4.500 INCHES NOMINAL IN |
| Fragility Factor | MODERATELY RUGGED |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) |
| Center to Center Distance Between Terminals Parallel to Length | 4.000 INCHES NOMINAL IN |
| Center to Center Distance Between Terminals Parallel to Width | 1.000 INCHES NOMINAL IN |
| Storage Type | GENERAL PURPOSE WAREHOUSE |
| Special Handling Feature | MAGNETIC |
| Pole Quantity | 3 |
| Reset Method | MANUAL |
| Material | PLASTIC CASE |
| Body Height | 3.375 INCHES NOMINAL IN |
| Trip Delay Time in Seconds Per Rated Continuous Current | 6.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| Body Style | MULTIPOLE-SINGLE ACTUATOR TYPE |
| Trip Release Method | THERMAL-MAGNETIC ALL LOCATIONS |
| Trip Release Characteristic | TIME DELAY ALL LOCATIONS |
| Actuator Position Designation | AT POLE TWO |
| Inclosure Protection Type for Which Designed | CORROSION RESISTANT |
| Frequency in Hertz | 60.0 ALL LOCATIONS |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 14000.0 AC ALL LOCATIONS |
| Actuator Function | TRIP-RESET |
| Manual Actuator Type and Quantity | 1 TOGGLE |
| Test Data Document | 81348-W-C-375 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Operating Voltage Type and Rating Per Pole in Volts | 480.0 AC ALL LOCATIONS |
| Specification/standard Data | 81348-W-C-375/18 GOVERNMENT SPECIFICATION |
| Circuit Protection Type | OVERCURRENT ALL LOCATIONS |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 135.0 ALL LOCATIONS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| W-C-375/18 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
| WC375/18-011 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
NSN 5925-01-292-3301 is a Circuit Breaker, manufactured by Federal Specifications Promulgated by General Services Administration Washington DC, classified under FSC 5925 (No Item Name Available). Status: active.
NSN 5925-01-292-3301 has 2 cross-referenced part numbers: W-C-375/18 (Federal Specifications Promulgated by General Services Administration Washington DC), WC375/18-011 (Federal Specifications Promulgated by General Services Administration Washington DC).
There are 11 known substitutes for 5925-01-292-3301: 5925-00-211-1900, 5925-00-232-2840, 5925-00-236-9000 and 8 more. Verify interchangeability with system specifications before substitution.
Key specifications for W-C-375/18: Body Width: 2.750 INCHES NOMINAL IN; Unthreaded Mounting Hole Diameter: 0.188 INCHES NOMINAL IN; Distance Between Centerlines of Mounting Facilities Parallel to Body Width: 1.000 INCHES NOMINAL IN; Boss Height: 0.125 INCHES NOMINAL IN. 30 total characteristics are documented in the Federal Logistics Information System.