The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-781-8779, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 27 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5905-00-781-8779 |
| Primary Part Number | DMS 85017B |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| Status | CANCELLED |
| Reliability Indicator | NOT ESTABLISHED |
| Center to Center Distance Between Center Terminal and Outside Terminal | 0.300 INCHES NOMINAL IN |
| Body Height | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Body Length | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Center to Center Distance Between Terminals | 0.600 INCHES NOMINAL IN |
| Rotary Actuator Travel in Angular Deg | 7200.0 MINIMUM AND 16200.0 MAXIMUM |
| Mounting Method | UNTHREADED HOLE(S) |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Resistance Tolerance Per Section in Percent | -5.0 TO 5.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 PIN |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -50.0 TO 50.0 SINGLE SECTION |
| Power Dissipation Rating Per Section in Watts | 0.8 FREE AIR SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 85.0 SINGLE SECTION |
| Specification/standard Data | 81349-MIL-R-27208/2 GOVERNMENT SPECIFICATION |
| Actuator Travel Control Feature | STOPS |
| Terminal Location | REAR END LOCATION NOT OTHERWISE SPECIFIED |
| Test Data Document | 81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Shaft Diameter | 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN |
| Section Quantity | 1 |
| Maximum Starting Torque | 8.00 INCH-OUNCES IN |
| Contact Arm Electrical Off Position | FULLY CW |
| Lateral Distance Between Mounting Hole Centers | 0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN |
| Effective Electrical Rotation in Deg Angular Rotation | 7200.0 MINIMUM AND 16200.0 MAXIMUM |
| Shaft Length | 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN |
| Mounting Hole Diameter | 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN |
| Shaft Style | ROUND, SLOTTED |
| Body Style | RECTANGULAR W/MOUNTING HOLES |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| DMS 85017B | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| RT10C2L501 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MILR27208-2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-27208/2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-00-781-8779 is a Resistor,variable,wire Wound,non, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5905 (No Item Name Available). Status: cancelled.
NSN 5905-00-781-8779 has 4 cross-referenced part numbers: DMS 85017B (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)), RT10C2L501 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MILR27208-2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-27208/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5905-00-781-8779: 5905-00-052-1794, 5905-00-068-8264, 5905-00-068-8265 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for DMS 85017B: Reliability Indicator: NOT ESTABLISHED; Center to Center Distance Between Center Terminal and Outside Terminal: 0.300 INCHES NOMINAL IN; Body Height: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN; Body Length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5905-00-781-8779 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.