The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-728-4286, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 25 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-728-4286 |
| Primary Part Number | MIL-PRF-27208/2 |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Center to Center Distance Between Center Terminal and Outside Terminal | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| Reliability Indicator | NOT ESTABLISHED |
| Mounting Method | TERMINAL |
| Maximum Running Torque | 8.00 INCH-OUNCES IN |
| Actuator Type | SINGLE SHAFT |
| Center to Center Distance Between Terminals | 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN |
| Shaft Diameter | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Lateral Distance Between Mounting Hole Centers | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN |
| Body Width | 0.295 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN |
| Body Height | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Shaft Style | ROUND, SLOTTED |
| Body Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| Shaft Length | 0.135 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 85.0 SINGLE SECTION |
| Resistance Tolerance Per Section in Percent | -5.0 TO 5.0 SINGLE SECTION |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -50.0 TO 50.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 PIN |
| Power Dissipation Rating Per Section in Watts | 0.8 FREE AIR SINGLE SECTION |
| Electrical Resistance Per Section | 100.000 OHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Terminal Location | REAR END LOCATION NOT OTHERWISE SPECIFIED |
| Test Data Document | 81349-MIL-R-27208-2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Section Quantity | 1 |
| Body Style | RECTANGULAR W/MOUNTING HOLES |
| Terminal Length | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-PRF-27208/2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RT10C2P101 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MILR27208-2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-00-728-4286 is a Resistor,variable,wire Wound,non, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-00-728-4286 has 3 cross-referenced part numbers: MIL-PRF-27208/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RT10C2P101 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MILR27208-2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5905-00-728-4286: 5905-00-068-8264, 5905-00-188-3930, 5905-00-681-3769 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-PRF-27208/2: Center to Center Distance Between Center Terminal and Outside Terminal: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN; Reliability Indicator: NOT ESTABLISHED; Mounting Method: TERMINAL; Maximum Running Torque: 8.00 INCH-OUNCES IN. 28 total characteristics are documented in the Federal Logistics Information System.