MILR27208-2 — Technical Data Sheet

✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.180 INCHES NOMINAL IN, body_height: 0.315 INCHES NOMINAL IN, body_length: 1.000 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, bearing_type: SLEEVE SHAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5905-00-188-3930, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MILR27208-2

NSN: 5905-00-188-3930
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES/SLOTS
body_width	0.180 INCHES NOMINAL IN
body_height	0.315 INCHES NOMINAL IN
body_length	1.000 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
bearing_type	SLEEVE SHAFT
shaft_length	0.050 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
cubic_measure	0.0567 CUBIC INCHES
overall_width	0.639 INCHES MINIMUM AND 0.721 INCHES MAXIMUM IN
overall_height	0.295 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
overall_length	1.025 INCHES MINIMUM AND 1.075 INCHES MAXIMUM IN
NSN	5905-00-188-3930

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT DIAMETER: 0.115 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE PER SECTION: 20.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

MOUNTING METHOD: UNTHREADED HOLE(S)

•

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS: -50.0 TO 50.0 SINGLE SECTION

•

SPECIFICATION/STANDARD DATA: 81349-MIL-R-27208/2 GOVERNMENT SPECIFICATION

•

TERMINAL LOCATION: REAR END LOCATION NOT OTHERWISE SPECIFIED

TECHNICAL CHARACTERISTICS

OVERALL WIDTH	0.180 INCHES NOMINAL IN
SHAFT DIAMETER	0.115 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION	20.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
MOUNTING METHOD	UNTHREADED HOLE(S)
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
SPECIFICATION/STANDARD DATA	81349-MIL-R-27208/2 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	REAR END LOCATION NOT OTHERWISE SPECIFIED
TEST DATA DOCUMENT	81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION

VERIFIED SUBSTITUTES & CROSS-REFERENCES 17

220L1-502KInterchangeableGOVERNMENT REGISTRY