The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-068-8265, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Bourns Inc. Government technical data includes 25 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5905-00-068-8265 |
| Primary Part Number | 220L1+103 |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Bourns Inc |
| Status | CANCELLED |
| Lateral Distance Between Mounting Hole Centers | 0.750 INCHES NOMINAL IN |
| Mounting Facility Quantity | 2 |
| Body Width | 0.180 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Electrical Resistance Per Section | 10.0 KILOHMS SINGLE SECTION |
| Terminal Location | REAR END LOCATION NOT OTHERWISE SPECIFIED |
| Terminal Type and Quantity | 3 WIRE LEAD |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -50.0 TO 50.0 SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 85.0 SINGLE SECTION |
| Mounting Method | UNTHREADED HOLE(S) |
| Test Data Document | 81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Resistance Tolerance Per Section in Percent | -5.0 TO 5.0 SINGLE SECTION |
| Specification/standard Data | 81349-MIL-R-27208/2 GOVERNMENT SPECIFICATION |
| Power Dissipation Rating Per Section in Watts | 0.7 FREE AIR SINGLE SECTION |
| Body Height | 0.315 INCHES NOMINAL IN |
| Body Style | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| Shaft Length | 0.050 INCHES NOMINAL IN |
| Shaft Diameter | 0.115 INCHES NOMINAL IN |
| Actuator Type | SINGLE SHAFT |
| Reliability Indicator | NOT ESTABLISHED |
| Contact Arm Electrical Off Position | FULLY CW |
| Mounting Hole Diameter | 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN |
| Body Length | 1.000 INCHES NOMINAL IN |
| Section Quantity | 1 |
| Shaft Style | ROUND, SLOTTED |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 220L1+103 | Bourns Inc (USA) |
| MILR27208 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| DMS 85017B | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| RT10C2L103 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-00-068-8265 is a Resistor,variable,wire Wound,non, manufactured by Bourns Inc, classified under FSC 5905 (No Item Name Available). Status: cancelled.
NSN 5905-00-068-8265 has 4 cross-referenced part numbers: 220L1+103 (Bourns Inc), MILR27208 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), DMS 85017B (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)), RT10C2L103 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5905-00-068-8265: 5905-00-052-1794, 5905-00-058-8934, 5905-00-068-5919 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for 220L1+103: Lateral Distance Between Mounting Hole Centers: 0.750 INCHES NOMINAL IN; Mounting Facility Quantity: 2; Body Width: 0.180 INCHES NOMINAL IN; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION. 25 total characteristics are documented in the Federal Logistics Information System.
NSN 5905-00-068-8265 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.