PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL1277013
5330PL1277013 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 AND RUBBER FLUOROCARBON CLASS FPM OVERALL, hole_diameter: 0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.500 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 2.841 INCHES NOMINAL IN, lubrication_method: IMPREGNATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-928-2472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL1277013
NSN: 5330-00-928-2472
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 302 AND RUBBER FLUOROCARBON CLASS FPM OVERALL
hole_diameter0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.500 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter2.841 INCHES NOMINAL IN
bolt_hole_quantity6
lubrication_methodIMPREGNATED
gage_ring_thickness0.092 INCHES NOMINAL IN
bolt_circle_diameter4.312 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.625 INCHES NOMINAL IN
cross-sectional_thickness0.144 INCHES NOMINAL IN
NSN5330-00-928-2472
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL1277013 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.144 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.841 INCHES NOMINAL IN
•
LUBRICATION METHOD: IMPREGNATED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-R-83248 TY 1,CL 1 OR CLBMARDGFA000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT CIRCLE DIAMETER: 4.312 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.144 INCHES NOMINAL IN
APERTURE DIAMETER2.841 INCHES NOMINAL IN
LUBRICATION METHODIMPREGNATED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-R-83248 TY 1,CL 1 OR CLBMARDGFA000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH4.500 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER4.312 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.625 INCHES NOMINAL IN
GAGE RING THICKNESS0.092 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
MS27196-32Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS27196Interchangeable
interchangeable cross-reference
interchangeable
NM100011 LI 141Interchangeable
interchangeable cross-reference
interchangeable
XG0299100101Interchangeable
interchangeable cross-reference
interchangeable
AS27196A-20Interchangeable
interchangeable cross-reference
interchangeable
MS27169-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL1277013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL1277013?
5330PL1277013 is a GASKET.
What parts can replace 5330PL1277013?
There are 15 known substitutes for 5330PL1277013: MS27196-32, SAE-AS27196, NM100011 LI 141 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL1277013?
5330PL1277013 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-928-2472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL1277013

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026