The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-264-3325, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-264-3325 |
| Primary Part Number | MIL-DTL-83796/1 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Outside Diameter | 1.125 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN |
| Minimum Inside Bending Radius | 5.500 INCHES IN |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Seat Angle | 37.0 DEGREES FIRST END |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Flow Angle | 45.0 DEGREES FIRST END |
| Inside Diameter | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN |
| End Connection Design | ELBOW FIRST END |
| Angle Between Rigid Elbow Fittings in Deg | 270.0 |
| Burst Test Pressure | 3000.0 POUNDS PER SQUARE INCH LBS |
| Connection Style | SWIVEL NUT FLARE SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Temp Rating | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Thread Quantity Per Inch | 12 SECOND END |
| Nominal Thread Size | 1.312 INCHES SECOND END IN |
| Thread Quantity Per Inch | 12 FIRST END |
| Thread Direction | RIGHT-HAND SECOND END |
| Layer Composition and Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Thread Class | 3B SECOND END |
| Thread Series Designator | UNIFIED NATIONAL JOINT (UNJ) FIRST END |
| End Connection Design | ELBOW SECOND END |
| Specification/standard Data | 81349-MIL-H-83796/1 GOVERNMENT SPECIFICATION |
| Operating Pressure | 750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Nominal Thread Size | 1.312 INCHES FIRST END IN |
| Measuring Method and Length | 7.125 INCHES MINIMUM WORKING AND 7.375 INCHES MAXIMUM WORKING IN |
| Hydrostatic Test Pressure | 1500.0 POUNDS PER SQUARE INCH LBS |
| Thread Series Designator | UNIFIED NATIONAL JOINT (UNJ) SECOND END |
| Inside Surface Condition | SMOOTH |
| Flow Angle | 90.0 DEGREES SECOND END |
| Media for Which Designed | FUEL/OIL, HYDROCARBON AND OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-DTL-83796/1 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 156062H0072D270 | Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division (USA) |
| M83796/1M072J270 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| AE7012M0072-270 | Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution (USA) |
| MIL-H-83796/1 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 4720-01-264-3325 is a Hose Assembly,nonmetallic, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-264-3325 has 5 cross-referenced part numbers: MIL-DTL-83796/1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 156062H0072D270 (Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division), M83796/1M072J270 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), AE7012M0072-270 (Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution), MIL-H-83796/1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 4720-01-264-3325: 4720-01-009-3651, 4720-01-162-2619, 4720-01-184-4217 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-DTL-83796/1: Outside Diameter: 1.125 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN; Minimum Inside Bending Radius: 5.500 INCHES IN; Connection Type: THREADED INTERNAL TUBE FIRST END; Seat Angle: 37.0 DEGREES FIRST END. 30 total characteristics are documented in the Federal Logistics Information System.