PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-H-83796/1
MIL-H-83796/1 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The MIL-H-83796/1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-009-3651, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-83796/1
NSN: 4720-01-009-3651
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-H-83796/1
NSN4720-01-009-3651
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-H-83796/1 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3B FIRST END
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
OPERATING PRESSURE: 500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
EXTERIOR COLOR: NATURAL
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT (UNJ) FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3B FIRST END
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
OPERATING PRESSURE500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
EXTERIOR COLORNATURAL
THREAD DIRECTIONRIGHT-HAND FIRST END
CONNECTION STYLESWIVEL NUT FLARE FIRST END
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT (UNJ) FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
OUTSIDE DIAMETER1.437 INCHES NOMINAL IN
OUTER COVERING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
S850D0220DInterchangeable
interchangeable cross-reference
interchangeable
156001-6D-0220Interchangeable
interchangeable cross-reference
interchangeable
AE1006703G0220Interchangeable
interchangeable cross-reference
interchangeable
GH12GInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83796/1Interchangeable
interchangeable cross-reference
interchangeable
M83796/1E067AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-H-83796/1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-83796/1?
MIL-H-83796/1 is a MIL-H-83796/1.
What parts can replace MIL-H-83796/1?
There are 28 known substitutes for MIL-H-83796/1: S850D0220D, 156001-6D-0220, AE1006703G0220 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-83796/1?
MIL-H-83796/1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-009-3651. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-83796/1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026