PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M83796/1M072J270

M83796/1M072J270 — Technical Data Sheet

✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES FIRST END, seat_angle: 37.0 DEGREES SECOND END, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 4720-01-264-3325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83796/1M072J270
NSN: 4720-01-264-3325
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
flow_angle45.0 DEGREES FIRST END
seat_angle37.0 DEGREES SECOND END
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
connection_styleSWIVEL NUT FLARE SECOND END
outside_diameter1.125 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure3000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-264-3325
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M83796/1M072J270 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.125 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
•
MINIMUM INSIDE BENDING RADIUS: 5.500 INCHES IN
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
FLOW ANGLE: 45.0 DEGREES FIRST END
•
INSIDE DIAMETER: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
•
END CONNECTION DESIGN: ELBOW FIRST END
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER1.125 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
MINIMUM INSIDE BENDING RADIUS5.500 INCHES IN
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
SEAT ANGLE37.0 DEGREES FIRST END
CONNECTION TYPETHREADED INTERNAL TUBE SECOND END
FLOW ANGLE45.0 DEGREES FIRST END
INSIDE DIAMETER0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
END CONNECTION DESIGNELBOW FIRST END
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG270.0
BURST TEST PRESSURE3000.0 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
MIL-DTL-83796/1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M83796/1N0204AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AE1000881N0204InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
S850D0220DInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
156001-6D-0220InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AE1006703G0220InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83796/1M072J270?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83796/1M072J270?
M83796/1M072J270 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace M83796/1M072J270?
There are 25 known substitutes for M83796/1M072J270: MIL-DTL-83796/1, M83796/1N0204A, AE1000881N0204 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83796/1M072J270?
M83796/1M072J270 is cataloged in the Federal Logistics Information System under NSN 4720-01-264-3325. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83796/1M072J270

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026