PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 23052564
23052564 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 AND RUBBER FLUOROCARBON CLASS FPM OVERALL, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hole_diameter: 0.200 INCHES MINIMUM AND 0.215 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.294 INCHES NOMINAL IN, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-944-5939, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23052564
NSN: 5330-00-944-5939
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 302 AND RUBBER FLUOROCARBON CLASS FPM OVERALL
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hole_diameter0.200 INCHES MINIMUM AND 0.215 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.294 INCHES NOMINAL IN
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
style_designatorNON-CIRCULAR
aperture_diameter0.899 INCHES MINIMUM AND 0.909 INCHES MAXIMUM IN
bolt_hole_quantity4
gage_ring_thickness0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
bolt_circle_diameter1.851 INCHES MINIMUM AND 1.861 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
NSN5330-00-944-5939
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23052564 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.132 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
GAGE RING THICKNESS: 0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-R-83248 TY 2,CL 1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.215 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER INVERTED RADIUS: 0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.132 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
GAGE RING THICKNESS0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-R-83248 TY 2,CL 1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
STYLE DESIGNATORNON-CIRCULAR
HOLE DIAMETER0.200 INCHES MINIMUM AND 0.215 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER INVERTED RADIUS0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
BOLT CIRCLE DIAMETER1.851 INCHES MINIMUM AND 1.861 INCHES MAXIMUM IN
OVERALL WIDTH2.294 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
MS27196-32Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS27196Interchangeable
interchangeable cross-reference
interchangeable
NM100011 LI 141Interchangeable
interchangeable cross-reference
interchangeable
XG0299100101Interchangeable
interchangeable cross-reference
interchangeable
AS27196A-20Interchangeable
interchangeable cross-reference
interchangeable
MS27169-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23052564?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23052564?
23052564 is a GASKET.
What parts can replace 23052564?
There are 16 known substitutes for 23052564: MS27196-32, SAE-AS27196, NM100011 LI 141 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23052564?
23052564 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-944-5939. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23052564

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026