PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 03-114-0100-4-3 2
03-114-0100-4-3 2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT, case_style: RECESSED, seal_width: 0.312 INCHES NOMINAL IN, outside_diameter: 2.627 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.623 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-042-8649, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03-114-0100-4-3 2
NSN: 5330-00-042-8649
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
case_styleRECESSED
seal_width0.312 INCHES NOMINAL IN
outside_diameter2.627 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.623 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-042-8649
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 03-114-0100-4-3 2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.627 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
•
HOUSING BORE DIAMETER: 2.623 INCHES NOMINAL IN
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.627 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
CASE STYLERECESSED
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
HOUSING BORE DIAMETER2.623 INCHES NOMINAL IN
SEAL WIDTH0.312 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
SURFACE TREATMENTPLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
111633Interchangeable
interchangeable cross-reference
interchangeable
18580Interchangeable
interchangeable cross-reference
interchangeable
180013Interchangeable
interchangeable cross-reference
interchangeable
N10026PC134Interchangeable
interchangeable cross-reference
interchangeable
K8982264Interchangeable
interchangeable cross-reference
interchangeable
8580Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03-114-0100-4-3 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03-114-0100-4-3 2?
03-114-0100-4-3 2 is a SEAL,PLAIN ENCASED.
What parts can replace 03-114-0100-4-3 2?
There are 17 known substitutes for 03-114-0100-4-3 2: 111633, 18580, 180013 and 14 more. Substitute compatibility should be verified for your specific system.
Is 03-114-0100-4-3 2 still available?
03-114-0100-4-3 2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03-114-0100-4-3 2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026