PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K8982264
K8982264 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.3750 INCHES NOMINAL IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL, overall_outside_diameter: 0.3438 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3075, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K8982264
NSN: 3110-00-120-3075
FSC: 3110
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.3750 INCHES NOMINAL IN
alignment_typeRIGID
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.3438 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-120-3075
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K8982264 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 0.3438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.1875 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER0.3438 INCHES NOMINAL IN
OVERALL WIDTH0.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
180013Interchangeable
interchangeable cross-reference
interchangeable
8580Interchangeable
interchangeable cross-reference
interchangeable
18580Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
158ND6772Interchangeable
interchangeable cross-reference
interchangeable
499504Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K8982264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K8982264?
K8982264 is a BEARING,ROLLER,NEEDLE.
What parts can replace K8982264?
There are 25 known substitutes for K8982264: 180013, 8580, 18580 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K8982264?
K8982264 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3075. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K8982264

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026