8580
✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include special_features: N2; NITROGEN GAS REGULATOR; FOR CGA CONNECTION SIZE NO. 580, part_name_assigned_by_controlling_agency: REGULATOR NITROGEN N2 F/CGA CONNECTION SZ 580.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-042-8649, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
8580
NSN: 5330-00-042-8649 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
special_features N2; NITROGEN GAS REGULATOR; FOR CGA CONNECTION SIZE NO. 580 part_name_assigned_by_controlling_agency REGULATOR NITROGEN N2 F/CGA CONNECTION SZ 580 NSN 5330-00-042-8649
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 8580
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 2.627 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
• HOUSING BORE DIAMETER: 2.623 INCHES NOMINAL IN
• SEAL WIDTH: 0.312 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 2.627 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 1.875 INCHES NOMINAL IN CASE STYLE RECESSED ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3600 FEET PER MINUTE FT MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT HOUSING BORE DIAMETER 2.623 INCHES NOMINAL IN SEAL WIDTH 0.312 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR SURFACE TREATMENT PLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
111633 Interchangeable interchangeable cross-reference
interchangeable
18580 Interchangeable interchangeable cross-reference
interchangeable
180013 Interchangeable interchangeable cross-reference
interchangeable
N10026PC134 Interchangeable interchangeable cross-reference
interchangeable
K8982264 Interchangeable interchangeable cross-reference
interchangeable
8580 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 8580?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8580?
8580 is a CONNECTOR,PLUG,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 8580?
There are 18 known substitutes for 8580: 111633, 18580, 180013 and 15 more. Substitute compatibility should be verified for your specific system.
Is 8580 still available?
8580 is currently cancelled.