PartsTable
Technical Data Sheet
PartsTable / MRO / 111633
111633 ✓ Verified by PartsTable
Beko · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, head_style: PAN, body_length: 2.000 INCHES MAXIMUM IN, head_height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, shaft_style: ROUND, pilot_length: 0.05000 INCHES MINIMUM AND 0.07000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-1633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 111633
NSN: 5305-00-011-1633
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1030 OVERALL
body_styleCYLINDRICAL SERVO MOUNTED
head_stylePAN
body_length2.000 INCHES MAXIMUM IN
head_height0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
shaft_styleROUND
pilot_length0.05000 INCHES MINIMUM AND 0.07000 INCHES MAXIMUM IN
shaft_length0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
NSN5305-00-011-1633
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 111633 · Beko ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: PAN NO. 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
MATERIAL: STEEL OVERALL
•
INTERNAL DRIVE STYLE: SLOT
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEPAN NO. 2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
MATERIALSTEEL OVERALL
INTERNAL DRIVE STYLESLOT
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
HEAD HEIGHT0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD DIAMETER0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
8580Interchangeable
interchangeable cross-reference
interchangeable
18580Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
140-1784-03-01-00Interchangeable
interchangeable cross-reference
interchangeable
1131H-CInterchangeable
interchangeable cross-reference
interchangeable
10-402-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 111633?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111633?
111633 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Beko. It is classified as a MRO (MRO_GENERAL).
What parts can replace 111633?
There are 14 known substitutes for 111633: 8580, 18580, 00044 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 111633?
111633 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-1633. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111633

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026