PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SLW01108CP
SLW01108CP ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OVERALL, hole_diameter: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN, outside_diameter: 0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL TEETH, surface_treatment: CADMIUM OVERALL, material_thickness: 0.020 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-530-9106, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SLW01108CP
NSN: 5310-00-530-9106
FSC: 5310
CAGE: 19315 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OVERALL
hole_diameter0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
outside_diameter0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
surface_treatmentCADMIUM OVERALL
material_thickness0.020 INCHES NOMINAL IN
material_document_and_classificationAMS 5044 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-530-9106
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SLW01108CP · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5044 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1010 OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT EXTERNAL TEETH
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
OUTSIDE DIAMETER0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5044 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1010 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
1108-00Interchangeable
interchangeable cross-reference
interchangeable
1108Interchangeable
interchangeable cross-reference
interchangeable
92527Interchangeable
interchangeable cross-reference
interchangeable
NAS1676C416Interchangeable
interchangeable cross-reference
interchangeable
MS35335-59Interchangeable
interchangeable cross-reference
interchangeable
79653Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SLW01108CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SLW01108CP?
SLW01108CP is a WASHER,LOCK.
What parts can replace SLW01108CP?
There are 13 known substitutes for SLW01108CP: 1108-00, 1108, 92527 and 10 more. Substitute compatibility should be verified for your specific system.
Is SLW01108CP still available?
SLW01108CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SLW01108CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026