PartsTable
Technical Data Sheet
Download PDF

1108-00 — INTERFERENCE CANCELLATION UNIT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1108-00: INTERFERENCE CANCELLATION UNIT.

The INTERFERENCE CANCELLATION UNIT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 ACTUATING ELEMENT, dial_size: 2-1/2 IN. DIA IN, bezel_type: SNAP-ON, scale_name: PRESSURE, scale_type: SINGLE, scale_range: +0.000 TO 1000.000 POUNDS PRESSURE PER SQUARE INCH LBS.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-209-4935, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1108-00
NSN: 5310-00-209-4935
NIINs: 002094935, 005309106, 005967693, 008717264, 010179473, 011568946, 012950787, 014939991, 015219920, 015841678, 016041875
FSC: 5310 — Nuts and Washers
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 316 ACTUATING ELEMENT
dial_size2-1/2 IN. DIA IN
bezel_typeSNAP-ON
scale_namePRESSURE
scale_typeSINGLE
scale_range+0.000 TO 1000.000 POUNDS PRESSURE PER SQUARE INCH LBS
pointer_typeINDICATING
adjustabilityNONADJUSTABLE
hole_diameter0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
overall_depth1.130 INCHES NOMINAL IN
pointer_colorBLACK
actuation_typeSINGLE BOURDON TUBE
NSN5310-00-209-4935
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1108-00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
OUTSIDE DIAMETER: 0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT EXTERNAL TEETH
OUTSIDE DIAMETER0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
1108Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
92527Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
K851269Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
851269Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1108-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1108-00?
1108-00 is a INTERFERENCE CANCELLATION UNIT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1108-00?
There are 4 known substitutes for 1108-00: 1108, 92527, K851269 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1108-00?
1108-00 is cataloged in the U.S. Government catalog under NSN 5310-00-209-4935. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1108-00