PartsTable
Technical Data Sheet
Download PDF

92527 — FRAME,PENCIL,PLOTTING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

92527: FRAME,PENCIL,PLOTTING.

The FRAME,PENCIL,PLOTTING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN, outside_diameter: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL TEETH, surface_treatment: ZINC AND CHROMATE OVERALL, material_thickness: 0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-4935, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92527
NSN: 5310-00-209-4935
NIINs: 002094935, 003819551, 005156901
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
outside_diameter0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
surface_treatmentZINC AND CHROMATE OVERALL
material_thickness0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
NSN5310-00-209-4935
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 92527 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
OUTSIDE DIAMETER: 0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT EXTERNAL TEETH
OUTSIDE DIAMETER0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
1108-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
1108Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
K851269Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
851269Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 92527?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92527?
92527 is a FRAME,PENCIL,PLOTTING.
What parts can replace 92527?
There are 4 known substitutes for 92527: 1108-00, 1108, K851269 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 92527?
92527 is cataloged in the U.S. Government catalog under NSN 5310-00-209-4935. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92527