PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NMC CL14INR32
NMC CL14INR32 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, special_features: COLOR NATURAL, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-822-8367, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NMC CL14INR32
NSN: 5340-00-822-8367
FSC: 5340
CAGE: 03296 — NMC GROUP, INC. (USA)
SPECIFICATIONS
diameter0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
special_featuresCOLOR NATURAL
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
loop_inside_diameter1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end1.705 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.395 INCHES MINIMUM AND 1.445 INCHES MAXIMUM IN
NSN5340-00-822-8367
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NMC CL14INR32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
MATERIAL THICKNESS: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.705 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR NATURAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
MATERIAL THICKNESS0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.705 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.395 INCHES MINIMUM AND 1.445 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
SAE-AS25281Upgraded Successor
successor cross-reference
successor
MS25281R18Upgraded Successor
successor cross-reference
successor
AS23190Upgraded Successor
successor cross-reference
successor
457-6209Upgraded Successor
successor cross-reference
successor
MS25281-F12Upgraded Successor
successor cross-reference
successor
10301187Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NMC CL14INR32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NMC CL14INR32?
NMC CL14INR32 is a CLAMP,LOOP.
What parts can replace NMC CL14INR32?
There are 23 known substitutes for NMC CL14INR32: SAE-AS25281, MS25281R18, AS23190 and 20 more. Substitute compatibility should be verified for your specific system.
Is NMC CL14INR32 still available?
NMC CL14INR32 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NMC CL14INR32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026