SAE-AS25281 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

SAE-AS25281: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, material_diameter: 0.032 INCHES NOMINAL IN, surface_treatment: ANODIZE BUCKLE/CLIP, material_thickness: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-061-2381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SAE-AS25281

NSN: 5340-00-061-2381
NIINs: 000612381, 000887768, 001047550, 001693946, 001700627, 003417056, 004624244, 005306833, 005433931, 005433934, 007215315, 007533456, 007542183, 007808450, 008071065, 008197408, 008201789, 008206058, 008206059, 008206093, 008213594, 008228367, 008334058, 008348789, 008913410, 008913412, 008961082, 009152342, 009265453, 009349784, 009349785, 009349786, 009353764, 009436041, 009543134, 009643664, 009883210, 009893032, 009899224, 009980612, 010140087, 010496353, 013022960, 013656702, 014117190, 014437685, 014497682, 014527548, 015680049, 015936215, 015942040, 016474903, 016474904
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	STEEL BAND
overall_width	0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
material_diameter	0.032 INCHES NOMINAL IN
surface_treatment	ANODIZE BUCKLE/CLIP
material_thickness	0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
loop_inside_diameter	0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
specification/standard_data	81343-AS25281 NATIONAL STD/SPEC
material_document_and_classification	MIL-M-20693,COMP A,TYPE 1 GOVERNMENT STD/SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.828 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency	CLAMP,LOOP,PLASTIC,WIRE SUPPORT
surface_treatment_document_and_classification	MIL-A-8625 GOVERNMENT STD/SPEC SINGLE TREATMENT RESPONSE BUCKLE/CLIP
NSN	5340-00-061-2381

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

DIAMETER: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.068 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.177 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.852 INCHES MINIMUM AND 0.902 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
OVERALL WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.068 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.177 INCHES NOMINAL IN
SPECIAL FEATURES	FURNISHED W/ALUMINUM EYELET IN TONGUE HOLE
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.852 INCHES MINIMUM AND 0.902 INCHES MAXIMUM IN
MATERIAL	PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
LOOP INSIDE DIAMETER	0.813 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

AS25281F13Reference document

Same NSN cross-reference

Reference document — Secondary reference

150-0708-120Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS25281F13Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy SAE-AS25281?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SAE-AS25281?

SAE-AS25281 is a CLAMP,LOOP.

What parts can replace SAE-AS25281?

There are 3 known substitutes for SAE-AS25281: AS25281F13, 150-0708-120, MS25281F13. Substitute compatibility should be verified for your specific system.

What is the NSN for SAE-AS25281?

SAE-AS25281 is cataloged in the U.S. Government catalog under NSN 5340-00-061-2381. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SAE-AS25281 — CLAMP,LOOP

Request a Quote — SAE-AS25281