PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10301187
10301187 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN, special_features: COLOR NATURAL, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-934-9786, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10301187
NSN: 5340-00-934-9786
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
diameter0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
special_featuresCOLOR NATURAL
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.068 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
loop_inside_diameter0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end1.270 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.945 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
NSN5340-00-934-9786
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10301187 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.945 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.270 INCHES NOMINAL IN
•
DIAMETER: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.945 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.270 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR NATURAL
DIAMETER0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
OVERALL WIDTH0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
MATERIAL THICKNESS0.068 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
SAE-AS25281Upgraded Successor
successor cross-reference
successor
AS25281F13Upgraded Successor
successor cross-reference
successor
150-0708-120Upgraded Successor
successor cross-reference
successor
MS25281-R12Upgraded Successor
successor cross-reference
successor
433-2021Upgraded Successor
successor cross-reference
successor
MS25281-F11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10301187?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10301187?
10301187 is a CLAMP,LOOP.
What parts can replace 10301187?
There are 29 known substitutes for 10301187: SAE-AS25281, AS25281F13, 150-0708-120 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10301187?
10301187 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-934-9786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10301187

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026