PartsTable
Technical Data Sheet
Download PDF

NASM35812 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NASM35812: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.593 INCHES NOMINAL IN, fork_depth: 3.387 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.623 INCHES MINIMUM AND 0.626 INCHES MAXIMUM IN, overall_width: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-015-6702, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NASM35812
NSN: 5340-00-015-6702
NIINs: 000156702, 009301755, 009850835
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.593 INCHES NOMINAL IN
fork_depth3.387 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter0.623 INCHES MINIMUM AND 0.626 INCHES MAXIMUM IN
overall_width1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
thread_length1.062 INCHES NOMINAL ROD CONNECTION IN
shank_diameter1.062 INCHES NOMINAL IN
fork_span_width0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentZINC OVERALL
NSN5340-00-015-6702
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NASM35812 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.250 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.810 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES NOMINAL BODY IN
•
THREAD DIRECTION: RIGHT-HAND BODY
•
NOMINAL THREAD SIZE: 0.750 INCHES BODY IN
•
THREAD CLASS: 2B BODY
•
THREAD QUANTITY PER INCH: 16 BODY
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.250 INCHES NOMINAL IN
FORK SPAN WIDTH0.810 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES NOMINAL BODY IN
OVERALL WIDTH1.620 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND BODY
NOMINAL THREAD SIZE0.750 INCHES BODY IN
THREAD CLASS2B BODY
THREAD QUANTITY PER INCH16 BODY
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNF BODY
SUBSTITUTES & CROSS-REFERENCES 3
MS35812-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-C-45918Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-45918AReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NASM35812?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM35812?
NASM35812 is a CLEVIS,ROD END.
What parts can replace NASM35812?
There are 3 known substitutes for NASM35812: MS35812-8, MIL-C-45918, MIL-DTL-45918A. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM35812?
NASM35812 is cataloged in the U.S. Government catalog under NSN 5340-00-015-6702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NASM35812

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.