PartsTable
Technical Data Sheet
Download PDF

MIL-DTL-45918A — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MIL-DTL-45918A: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 2B BODY, overall_width: 1.620 INCHES NOMINAL IN, thread_length: 1.500 INCHES NOMINAL BODY IN, shank_diameter: 1.250 INCHES NOMINAL IN, fork_span_width: 0.810 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-015-6702, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-45918A
NSN: 5340-00-015-6702
FSC: 5340 — Hardware, Commercial
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
thread_class2B BODY
overall_width1.620 INCHES NOMINAL IN
thread_length1.500 INCHES NOMINAL BODY IN
shank_diameter1.250 INCHES NOMINAL IN
fork_span_width0.810 INCHES NOMINAL IN
thread_directionRIGHT-HAND BODY
nominal_thread_size0.750 INCHES BODY IN
thread_quantity_per_inch16 BODY
thread_series_designatorUNF BODY
distance_from_pivot_pinhole_center_to_rod_connection_end4.560 INCHES NOMINAL IN
NSN5340-00-015-6702
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-DTL-45918A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.250 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.810 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES NOMINAL BODY IN
•
THREAD DIRECTION: RIGHT-HAND BODY
•
NOMINAL THREAD SIZE: 0.750 INCHES BODY IN
•
THREAD CLASS: 2B BODY
•
THREAD QUANTITY PER INCH: 16 BODY
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.250 INCHES NOMINAL IN
FORK SPAN WIDTH0.810 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES NOMINAL BODY IN
OVERALL WIDTH1.620 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND BODY
NOMINAL THREAD SIZE0.750 INCHES BODY IN
THREAD CLASS2B BODY
THREAD QUANTITY PER INCH16 BODY
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNF BODY
SUBSTITUTES & CROSS-REFERENCES 3
MS35812-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-C-45918Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM35812Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MIL-DTL-45918A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-45918A?
MIL-DTL-45918A is a CLEVIS,ROD END.
What parts can replace MIL-DTL-45918A?
There are 3 known substitutes for MIL-DTL-45918A: MS35812-8, MIL-C-45918, NASM35812. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-45918A?
MIL-DTL-45918A is cataloged in the U.S. Government catalog under NSN 5340-00-015-6702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-45918A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.