PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35812-8
MS35812-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 2B BODY, overall_width: 1.620 INCHES NOMINAL IN, thread_length: 1.500 INCHES NOMINAL BODY IN, shank_diameter: 1.250 INCHES NOMINAL IN, fork_span_width: 0.810 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-015-6702, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35812-8
NSN: 5340-00-015-6702
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
thread_class2B BODY
overall_width1.620 INCHES NOMINAL IN
thread_length1.500 INCHES NOMINAL BODY IN
shank_diameter1.250 INCHES NOMINAL IN
fork_span_width0.810 INCHES NOMINAL IN
thread_directionRIGHT-HAND BODY
nominal_thread_size0.750 INCHES BODY IN
thread_quantity_per_inch16 BODY
thread_series_designatorUNF BODY
distance_from_pivot_pinhole_center_to_rod_connection_end4.560 INCHES NOMINAL IN
NSN5340-00-015-6702
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS35812-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND BODY
•
SHANK DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
THREAD CLASS: 2B BODY
•
NOMINAL THREAD SIZE: 0.750 INCHES BODY IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 4.560 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES NOMINAL BODY IN
•
FORK SPAN WIDTH: 0.810 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND BODY
SHANK DIAMETER1.250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
THREAD CLASS2B BODY
NOMINAL THREAD SIZE0.750 INCHES BODY IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END4.560 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES NOMINAL BODY IN
FORK SPAN WIDTH0.810 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF BODY
OVERALL WIDTH1.620 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
MS35812-11Upgraded Successor
successor cross-reference
successor
2708-6CUpgraded Successor
successor cross-reference
successor
7096851Upgraded Successor
successor cross-reference
successor
MIL-C-45918Upgraded Successor
successor cross-reference
successor
MS27976-10Upgraded Successor
successor cross-reference
successor
MS35812-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35812-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35812-8?
MS35812-8 is a CLEVIS,ROD END.
What parts can replace MS35812-8?
There are 12 known substitutes for MS35812-8: MS35812-11, 2708-6C, 7096851 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35812-8?
MS35812-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-015-6702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35812-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026