Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.590 INCHES MINIMUM AND 1.610 INCHES MAXIMUM IN, length: 0.830 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, overall_height: 0.950 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-026-2083, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NAS1463
NSN:5340-00-026-2083 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
width
1.590 INCHES MINIMUM AND 1.610 INCHES MAXIMUM IN
length
0.830 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
hole_quantity
2
overall_height
0.950 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
style_designator
STANDOFF
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.025 INCHES NOMINAL IN
loop/holding_dimension
0.715 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
mounting_facility_quantity
2
NSN
5340-00-026-2083
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.810 INCHES NOMINAL IN
•
WIDTH: 1.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.750 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH
0.810 INCHES NOMINAL IN
WIDTH
1.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION
0.750 INCHES NOMINAL IN
OVERALL HEIGHT
0.920 INCHES NOMINAL IN
MOUNTING METHOD
UNTHREADED HOLE(S)
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
MATERIAL
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
DISTANCE FROM LOOP CENTER TO END
0.475 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1463?
NAS1463 is a CLIP,SPRING TENSION.
What parts can replace NAS1463?
There are 26 known substitutes for NAS1463: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 23 more. Substitute compatibility should be verified for your specific system.
Is NAS1463 still available?
NAS1463 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.