PartsTable
Technical Data Sheet

MS24066/2-032 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS24066/2-032: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.250 INCHES NOMINAL IN, length: 0.810 INCHES NOMINAL IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.144 INCHES NOMINAL IN, overall_height: 0.920 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-026-2083, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24066/2-032
NSN: 5340-00-026-2083
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width1.250 INCHES NOMINAL IN
length0.810 INCHES NOMINAL IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter0.144 INCHES NOMINAL IN
overall_height0.920 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.026 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
loop/holding_dimension0.750 INCHES NOMINAL IN
distance_from_loop_center_to_end0.475 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-026-2083
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS24066/2-032 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.810 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.026 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.475 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.920 INCHES NOMINAL IN
LENGTH0.810 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.026 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.475 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH1.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 8
5340004861924Reference document
Same NSN cross-reference
Reference document — Informative reference only
457-5671Reference document
Same NSN cross-reference
Reference document — Informative reference only
MIL-C-24066/2Reference document
Same NSN cross-reference
Reference document — Secondary reference
M24066-2-232Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM24066/2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
NAS1463Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS24066/2-032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24066/2-032?
MS24066/2-032 is a CLIP,SPRING TENSION.
What parts can replace MS24066/2-032?
There are 8 known substitutes for MS24066/2-032: 5340004861924, 457-5671, MIL-C-24066/2 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24066/2-032?
MS24066/2-032 is cataloged in the U.S. Government catalog under NSN 5340-00-026-2083. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24066/2-032

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.