Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, length: 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN, material: COPPER ALLOY OVERALL, hole_diameter: 0.071 INCHES NOMINAL IN, overall_height: 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-026-2083, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-C-24066/2
NSN:5340-00-026-2083 FSC:5340 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
width
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
length
0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
material
COPPER ALLOY OVERALL
hole_diameter
0.071 INCHES NOMINAL IN
hole_quantity
1
overall_height
0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
style_designator
STANDOFF
surface_treatment
CADMIUM OVERALL
material_thickness
0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
loop/holding_dimension
0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.1325 INCHES NOMINAL IN
NSN
5340-00-026-2083
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.810 INCHES NOMINAL IN
•
WIDTH: 1.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.750 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH
0.810 INCHES NOMINAL IN
WIDTH
1.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION
0.750 INCHES NOMINAL IN
OVERALL HEIGHT
0.920 INCHES NOMINAL IN
MOUNTING METHOD
UNTHREADED HOLE(S)
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
MATERIAL
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
DISTANCE FROM LOOP CENTER TO END
0.475 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-C-24066/2?
MIL-C-24066/2 is a CLIP,SPRING TENSION.
What parts can replace MIL-C-24066/2?
There are 24 known substitutes for MIL-C-24066/2: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 21 more. Substitute compatibility should be verified for your specific system.
Is MIL-C-24066/2 still available?
MIL-C-24066/2 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.