PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MSS SP-58 TYPE 1
MSS SP-58 TYPE 1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANGER,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL, style_designator: CLEVIS, nondefinitive_spec/std_data: 1 TYPE, pipe_accommodation_diameter: 1.500 INCHES NOMINAL IN, supported_item_and_quantity: 1 PIPE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-641-3695, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MSS SP-58 TYPE 1
NSN: 5340-00-641-3695
FSC: 5340
CAGE: 59646 — MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS INDUSTRY INC (USA)
SPECIFICATIONS
materialSTEEL
style_designatorCLEVIS
nondefinitive_spec/std_data1 TYPE
pipe_accommodation_diameter1.500 INCHES NOMINAL IN
supported_item_and_quantity1 PIPE
NSN5340-00-641-3695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MSS SP-58 TYPE 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLEVIS
•
PIPE ACCOMMODATION DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCLEVIS
PIPE ACCOMMODATION DIAMETER1.500 INCHES NOMINAL IN
MATERIALSTEEL
NONDEFINITIVE SPEC/STD DATA1 TYPE
SUPPORTED ITEM AND QUANTITY1 PIPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
WWH171Upgraded Successor
successor cross-reference
successor
104G-2Upgraded Successor
successor cross-reference
successor
260-6Upgraded Successor
successor cross-reference
successor
WWH171TYPE1Upgraded Successor
successor cross-reference
successor
260GUpgraded Successor
successor cross-reference
successor
260-3-4PDUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MSS SP-58 TYPE 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MSS SP-58 TYPE 1?
MSS SP-58 TYPE 1 is a HANGER,PIPE.
What parts can replace MSS SP-58 TYPE 1?
There are 7 known substitutes for MSS SP-58 TYPE 1: WWH171, 104G-2, 260-6 and 4 more. Substitute compatibility should be verified for your specific system.
Is MSS SP-58 TYPE 1 still available?
MSS SP-58 TYPE 1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MSS SP-58 TYPE 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026