PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 104G-2
104G-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANGER,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL, special_features: INSULATED PIPE, style_designator: CLEVIS, nondefinitive_spec/std_data: 1 TYPE, pipe_accommodation_diameter: 2.000 INCHES NOMINAL IN, supported_item_and_quantity: 1 PIPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-216-8221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
104G-2
NSN: 5340-00-216-8221
FSC: 5340
CAGE: 0P2R5 — GRINNELL FIRE PROTECTION SYSTEM CO DIV OF GRINNELL CORP (USA)
SPECIFICATIONS
materialSTEEL
special_featuresINSULATED PIPE
style_designatorCLEVIS
nondefinitive_spec/std_data1 TYPE
pipe_accommodation_diameter2.000 INCHES NOMINAL IN
supported_item_and_quantity1 PIPE
NSN5340-00-216-8221
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 104G-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
MATERIAL: STEEL
•
PIPE ACCOMMODATION DIAMETER: 2.000 INCHES NOMINAL IN
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA1 TYPE
MATERIALSTEEL
PIPE ACCOMMODATION DIAMETER2.000 INCHES NOMINAL IN
SPECIAL FEATURESINSULATED PIPE
SUPPORTED ITEM AND QUANTITY1 PIPE
STYLE DESIGNATORCLEVIS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
A-A-1192Upgraded Successor
successor cross-reference
successor
MSS SP-58 TY11Upgraded Successor
successor cross-reference
successor
WW-H-171 NR11Upgraded Successor
successor cross-reference
successor
ANSI/MSS-SP-58Upgraded Successor
successor cross-reference
successor
WWH171Upgraded Successor
successor cross-reference
successor
WWH171TYPE1Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 104G-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 104G-2?
104G-2 is a HANGER,PIPE.
What parts can replace 104G-2?
There are 13 known substitutes for 104G-2: A-A-1192, MSS SP-58 TY11, WW-H-171 NR11 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 104G-2?
104G-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-216-8221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 104G-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026