PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WWH171TYPE1
WWH171TYPE1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANGER,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL, style_designator: CLEVIS, nondefinitive_spec/std_data: 1 TYPE, pipe_accommodation_diameter: 0.750 INCHES NOMINAL IN, supported_item_and_quantity: 1 PIPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-527-0918, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WWH171TYPE1
NSN: 5340-00-527-0918
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL
style_designatorCLEVIS
nondefinitive_spec/std_data1 TYPE
pipe_accommodation_diameter0.750 INCHES NOMINAL IN
supported_item_and_quantity1 PIPE
NSN5340-00-527-0918
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WWH171TYPE1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
•
STYLE DESIGNATOR: CLEVIS
•
PIPE ACCOMMODATION DIAMETER: 6.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
SUPPORTED ITEM AND QUANTITY1 PIPE
STYLE DESIGNATORCLEVIS
PIPE ACCOMMODATION DIAMETER6.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2606Upgraded Successor
successor cross-reference
successor
WWH171Upgraded Successor
successor cross-reference
successor
WWH171TYPE1Upgraded Successor
successor cross-reference
successor
5340Z010002Upgraded Successor
successor cross-reference
successor
MSS-SP-58Upgraded Successor
successor cross-reference
successor
A-A-1192AUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WWH171TYPE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WWH171TYPE1?
WWH171TYPE1 is a HANGER,PIPE.
What parts can replace WWH171TYPE1?
There are 7 known substitutes for WWH171TYPE1: 2606, WWH171, WWH171TYPE1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WWH171TYPE1?
WWH171TYPE1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-527-0918. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WWH171TYPE1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026