Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include color: RED, material: RUBBER SILICONE CLASS Q OVERALL, hardness_rating: 50.0 SHORE DUROMETER A NOMINAL OVERALL, special_features: PERIPHERAL DIAMETER: 0.385 IN. MIN.
AND 0.395 IN. MAX. IN, center_hole_diameter: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, fsc_application_data: RF COAXIAL CONNECTOR.
This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-889-2164, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS90133-1
NSN:5330-00-889-2164 FSC:5330 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
color
RED
material
RUBBER SILICONE CLASS Q OVERALL
hardness_rating
50.0 SHORE DUROMETER A NOMINAL OVERALL
special_features
PERIPHERAL DIAMETER: 0.385 IN. MIN. AND 0.395 IN. MAX. IN
center_hole_diameter
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
fsc_application_data
RF COAXIAL CONNECTOR
cross-sectional_height
0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
NSN
5330-00-889-2164
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL OVERALL
•
COLOR: RED
•
FSC APPLICATION DATA: RF COAXIAL CONNECTOR
•
CROSS-SECTIONAL HEIGHT: 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL
RUBBER SILICONE CLASS Q OVERALL
HARDNESS RATING
50.0 SHORE DUROMETER A NOMINAL OVERALL
SPECIAL FEATURES
PERIPHERAL DIAMETER: 0.385 IN. MIN. AND 0.395 IN. MAX. IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90133-1?
MS90133-1 is a GASKET.
What parts can replace MS90133-1?
There are 6 known substitutes for MS90133-1: MS90133-3, MS90133, MILC71 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS90133-1?
MS90133-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-889-2164. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.