PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 82-1984
82-1984 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include color: CLEAR INSCRIPTION, material: RUBBER SYNTHETIC OVERALL, inscription: GEN AND POWER BACK, overall_length: 0.510 INCHES NOMINAL IN, mounting_method: PRESS FIT, effective_length: 0.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-618-3376, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
82-1984
NSN: 5330-00-618-3376
FSC: 5330
CAGE: 74868 — AMPHENOL CORPORATION DIV AMPHENOL RF (USA)
SPECIFICATIONS
colorCLEAR INSCRIPTION
materialRUBBER SYNTHETIC OVERALL
inscriptionGEN AND POWER BACK
overall_length0.510 INCHES NOMINAL IN
mounting_methodPRESS FIT
effective_length0.250 INCHES NOMINAL IN
special_featuresCONSTRUCTION: SOLID;CROSS-SECTIONAL WIDTH: 0.099 IN. NOM. IN
style_designatorFLAT
aperture_diameter0.437 INCHES NOMINAL IN
features_providedREVERSED INSCRIPTION METHOD
surface_conditionSMOOTH FACE
effective_diameter1.125 INCHES NOMINAL IN
NSN5330-00-618-3376
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 82-1984 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.437 INCHES NOMINAL IN
•
FABRICATION METHOD: SOLID
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.437 INCHES NOMINAL IN
FABRICATION METHODSOLID
SPECIAL FEATURESCONSTRUCTION: SOLID;CROSS-SECTIONAL WIDTH: 0.099 IN. NOM. IN
CROSS-SECTIONAL HEIGHT0.100 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
7478626Interchangeable
interchangeable cross-reference
interchangeable
78F290Interchangeable
interchangeable cross-reference
interchangeable
4610015044Interchangeable
interchangeable cross-reference
interchangeable
82-96Interchangeable
interchangeable cross-reference
interchangeable
UG21CInterchangeable
interchangeable cross-reference
interchangeable
MILC71Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 82-1984?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82-1984?
82-1984 is a GASKET.
What parts can replace 82-1984?
There are 25 known substitutes for 82-1984: 7478626, 78F290, 4610015044 and 22 more. Substitute compatibility should be verified for your specific system.
Is 82-1984 still available?
82-1984 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 82-1984

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026