PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS90133-3
MS90133-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 0.655 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-618-2328, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS90133-3
NSN: 5330-00-618-2328
FSC: 5330
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter0.655 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
NSN5330-00-618-2328
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS90133-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.655 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER0.655 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
7478626Interchangeable
interchangeable cross-reference
interchangeable
78F290Interchangeable
interchangeable cross-reference
interchangeable
4610015044Interchangeable
interchangeable cross-reference
interchangeable
82-96Interchangeable
interchangeable cross-reference
interchangeable
UG21CInterchangeable
interchangeable cross-reference
interchangeable
MILC71Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS90133-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS90133-3?
MS90133-3 is a GASKET.
What parts can replace MS90133-3?
There are 25 known substitutes for MS90133-3: 7478626, 78F290, 4610015044 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS90133-3?
MS90133-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-618-2328. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS90133-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026