PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35494-121
MS35494-121 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNKFLAT COUNTERSUNK, head_diameter: 0.437 INCHES MINIMUM AND 0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM0.491 INCHES MAXIMUM IN, fastener_length: 2.906 INCHES MINIMUM AND 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM3.000 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM OR CADMIUM OR ZINC OVERALLZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-265-4410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35494-121
NSN: 5305-00-265-4410
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNKFLAT COUNTERSUNK
head_diameter0.437 INCHES MINIMUM AND 0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM0.491 INCHES MAXIMUM IN
fastener_length2.906 INCHES MINIMUM AND 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM3.000 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM OR CADMIUM OR ZINC OVERALLZINC OVERALL
internal_drive_styleSLOTSLOT
nonmachine_thread_styleWOOD SCREW (TYPE WD)WOOD SCREW (TYPE WD)
nondefinitive_spec/std_data1 TYPE AND 1 TYPE AND 2S STYLE2S STYLE
nonmachine_nominal_thread_diameter0.242 INCHES0.242 INCHES IN
NSN5305-00-265-4410
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35494-121 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES0.242 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 TYPE AND 2S STYLE2S STYLE
•
HEAD DIAMETER: 0.437 INCHES MINIMUM AND 0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM0.491 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR CADMIUM OR ZINC OVERALLZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
FASTENER LENGTH: 2.906 INCHES MINIMUM AND 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM3.000 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNKFLAT COUNTERSUNK
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE NOMINAL THREAD DIAMETER0.242 INCHES0.242 INCHES IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 TYPE AND 2S STYLE2S STYLE
HEAD DIAMETER0.437 INCHES MINIMUM AND 0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM0.491 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR CADMIUM OR ZINC OVERALLZINC OVERALL
MATERIALSTEEL OVERALL
FASTENER LENGTH2.906 INCHES MINIMUM AND 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM3.000 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNKFLAT COUNTERSUNK
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM82.0 DEGREES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALLQQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)WOOD SCREW (TYPE WD)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MS35492-598Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111DInterchangeable
interchangeable cross-reference
interchangeable
MS35492-98Interchangeable
interchangeable cross-reference
interchangeable
FFS111Interchangeable
interchangeable cross-reference
interchangeable
AN550-4R12Interchangeable
interchangeable cross-reference
interchangeable
MS35492-271Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35494-121?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35494-121?
MS35494-121 is a SCREW,WOOD.
What parts can replace MS35494-121?
There are 14 known substitutes for MS35494-121: MS35492-598, FF-S-111D, MS35492-98 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35494-121?
MS35494-121 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-265-4410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35494-121

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026