MS35492-271 — Technical Data Sheet

✓ Verified by PartsTable

— · BOLT SCREW

WHAT YOU NEED TO KNOW

Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch

Verify thread pitch — metric != imperial

PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, fastener_length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, internal_drive_style: CROSS RECESS TYPE 1. This part is cataloged in the Federal Logistics Information System under NSN 5305-00-180-1526, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS35492-271

NSN: 5305-00-180-1526
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	COPPER ALLOY OVERALL
head_style	FLAT COUNTERSUNK
head_diameter	0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
fastener_length	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
countersink_angle	80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_style	CROSS RECESS TYPE 1
nonmachine_thread_style	GIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter	0.190 INCHES IN
material_document_and_classification	QQ-B-613,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5305-00-180-1526

COMPONENT DIAGRAM

KEY FEATURES

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

MATERIAL: COPPER ALLOY OVERALL

•

COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM

•

HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN

•

NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN

•

INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1

•

NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)

•

FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-613,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	COPPER ALLOY OVERALL
COUNTERSINK ANGLE	80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER	0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
NONMACHINE NOMINAL THREAD DIAMETER	0.190 INCHES IN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
NONMACHINE THREAD STYLE	GIMLET POINT (TYPE A, AB OR BA)
FASTENER LENGTH	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
HEAD STYLE	FLAT COUNTERSUNK

VERIFIED SUBSTITUTES & CROSS-REFERENCES 14

MS35492-598InterchangeableGOVERNMENT REGISTRY