PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-598
MS35492-598 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, fastener_length: 2.500 INCHES NOMINAL IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM AND CHROMATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-164-6953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-598
NSN: 5305-00-164-6953
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
fastener_length2.500 INCHES NOMINAL IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.216 INCHES IN
surface_treatment_document_and_classificationQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5305-00-164-6953
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-598 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
MATERIAL: STEEL OVERALL
•
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
FASTENER LENGTH: 2.432 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
MATERIALSTEEL OVERALL
HEAD DIAMETER0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH2.432 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2,CL3, FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY2,CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
FFS111Interchangeable
interchangeable cross-reference
interchangeable
AN550-4R12Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111DInterchangeable
interchangeable cross-reference
interchangeable
MS35492-271Interchangeable
interchangeable cross-reference
interchangeable
MS35493-81Interchangeable
interchangeable cross-reference
interchangeable
MS35493-83Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-598?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-598?
MS35492-598 is a SCREW,WOOD.
What parts can replace MS35492-598?
There are 15 known substitutes for MS35492-598: FFS111, AN550-4R12, FF-S-111D and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35492-598?
MS35492-598 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-164-6953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-598

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026