PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35493-83
MS35493-83 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: ROUND, head_height: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN, head_diameter: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, fastener_length: 2.190 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN, surface_treatment: CADMIUM OR ZINC OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-180-1605, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35493-83
NSN: 5305-00-180-1605
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleROUND
head_height0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
head_diameter0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
fastener_length2.190 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
surface_treatmentCADMIUM OR ZINC OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 1C STYLE
nonmachine_nominal_thread_diameter0.190 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5305-00-180-1605
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35493-83 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1C STYLE
•
FASTENER LENGTH: 2.190 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
HEAD STYLE: ROUND
•
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1C STYLE
FASTENER LENGTH2.190 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
HEAD STYLEROUND
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MS35492-598Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111DInterchangeable
interchangeable cross-reference
interchangeable
MS35492-98Interchangeable
interchangeable cross-reference
interchangeable
FFS111Interchangeable
interchangeable cross-reference
interchangeable
AN550-4R12Interchangeable
interchangeable cross-reference
interchangeable
MS35492-271Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35493-83?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35493-83?
MS35493-83 is a SCREW,WOOD.
What parts can replace MS35493-83?
There are 18 known substitutes for MS35493-83: MS35492-598, FF-S-111D, MS35492-98 and 15 more. Substitute compatibility should be verified for your specific system.
Is MS35493-83 still available?
MS35493-83 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35493-83

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026