PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-105

MS35492-105 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN, fastener_length: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5305-00-901-3096, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-105
NSN: 5305-00-901-3096
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
fastener_length0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 2C STYLE
nonmachine_nominal_thread_diameter0.242 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5305-00-901-3096
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-105 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2C STYLE
•
HEAD STYLE: FLAT COUNTERSUNK
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2C STYLE
HEAD STYLEFLAT COUNTERSUNK
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
NONMACHINE NOMINAL THREAD DIAMETER0.242 INCHES IN
HEAD DIAMETER0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MS35492-598InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FF-S-111DInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS35492-98InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FFS111InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AN550-4R12InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS35492-271InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-105?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-105?
MS35492-105 is a SCREW,WOOD.
What parts can replace MS35492-105?
There are 14 known substitutes for MS35492-105: MS35492-598, FF-S-111D, MS35492-98 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35492-105?
MS35492-105 is cataloged in the Federal Logistics Information System under NSN 5305-00-901-3096. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-105

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026