PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6085-1C
6085-1C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PIN,COTTER is a the manufacturer industrial component. Key specifications include width: 1.875 INCHES NOMINAL IN, length: 1.060 INCHES NOMINAL IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.144 INCHES NOMINAL IN, overall_height: 1.220 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-042-3968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6085-1C
NSN: 5340-00-042-3968
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width1.875 INCHES NOMINAL IN
length1.060 INCHES NOMINAL IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter0.144 INCHES NOMINAL IN
overall_height1.220 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.032 INCHES NOMINAL IN
loop/holding_dimension1.000 INCHES NOMINAL IN
distance_from_loop_center_to_end0.670 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,T-1/4H FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-00-042-3968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6085-1C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 1.000 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
•
LENGTH: 1.060 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,T-1/4H FED SPEC ALL MATERIAL RESPONSES OVERALL
•
WIDTH: 1.875 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.144 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.670 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS (FLIS)
LOOP/HOLDING DIMENSION1.000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
LENGTH1.060 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,T-1/4H FED SPEC ALL MATERIAL RESPONSES OVERALL
WIDTH1.875 INCHES NOMINAL IN
HOLE DIAMETER0.144 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.670 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
OVERALL HEIGHT1.220 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
M24066/4-117Upgraded Successor
successor cross-reference
successor
NASM24066/4Upgraded Successor
successor cross-reference
successor
MIL-C-24066/4DUpgraded Successor
successor cross-reference
successor
10424396Interchangeable
interchangeable cross-reference
interchangeable
940.17.02.262Interchangeable
interchangeable cross-reference
interchangeable
5315008395821Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6085-1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6085-1C?
6085-1C is a PIN,COTTER.
What parts can replace 6085-1C?
There are 8 known substitutes for 6085-1C: M24066/4-117, NASM24066/4, MIL-C-24066/4D and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6085-1C?
6085-1C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-042-3968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6085-1C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026